Muratec MFX-2530 Quick Reference page 20

If the platen cover is blinking on the LCD
Open the ADF cover by holding the ADF cover release.
Remove the original document
from the machine by turning
the green dial right or left.
If you cannot see the paper under the platen cover,
remove the paper from the ADF as shown on pages 32-33.
Confirm that documents do not remain in the ADF cover.
Then close the ADF cover and the platen cover.
20
Document jam
Open & Check
the blinking
cover.
Open the platen cover.
CAUTION:
Be careful not to put your hand under
the platen cover and the ADF cover.