European Low Voltage Directive; Emc, Safety, And Terminal Directive Compliance - Multitech MT2834ZDX Quick Reference Manual

Quick Reference Guide

European Low Voltage Directive

When correctly installed, the modem will present no hazard to the user.
When correctly installed, the modem will be connected to the PSTN or a PW
and to a Data Terminal Equipment (DTE), whose modem connections com-
ply with ITU-T recommendation V.28. The DTE connections are therefore
taken to be safe voltages (less than ±30 volts).
Ports that are capable of connecting to other apparatus are defined as
SELV. To ensure conformity with EN60950, ensure that these ports are only
connected to ports of the same type on other apparatus.
The main power source shall be installed near to the equipment and shall be
easily accessible. The plug that connects the apparatus to the mains power
supply must be fitted with a 5A fuse that complies with BS1362.

EMC, Safety, and Terminal Directive Compliance

The CE mark is affixed to this product to confirm compliance with the
following European Community Directives:
• Council Directive 89/336/EEC of 3 May 1989 on the approximation of
the laws of Member States relating to electromagnetic compatibility;
and
• Council Directive 73/23/EEC of 19 February 1973 on the harmonization
of the laws of Member States relating to electrical equipment designed
for use within certain voltage limits;
and
• Council Directive 98/13/EC of 12 March 1998 on the approximation of
the laws of Member States concerning telecommunications terminal
and Satellite earth station equipment.
80