Multitech MT2834ZDX Quick Reference Manual page 55

4 AT Commands, S-Registers, and Result Codes
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Note: The ZDXK is locked to a 67:33 pulse ratio (&P1).
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
P Pulse Dial
n/a
Yes
The modem pulse-dials numbers that follow P in
the dialing command.
&P n Set Pulse Dial Ratios
n = 0 or 1
0
&P0 60:40 break/make pulse ratio.
&P1 67:33 break/make pulse ratio.
Q n Result Codes Enable/Disable
n = 0, 1, or 2
0
Q0 Enable result codes.
Q1 Disable result codes (quiet).
Q2 Enable no-response answer mode, which leaves
originate mode intelligent while turning off
answer mode responses and echo.
&Q n
Multi-Tech or Standard Result Codes
n = 0 or 1
0
&Q0 Multi-Tech responses with modifiers.
&Q1 Standard AT responses with no modifiers.
47