Multitech MT2834ZDX Quick Reference Manual page 25

8. Click OK, and then click Dial. You will know you have reached a
modem by the harsh sounds of the modem handshake.
9. When the BBS welcome screen appears in the HyperTerminal win-
dow, type your first name, last name, and password following the
prompts. If you are a first-time caller, the BBS asks if your name is
spelled correctly. If you answer Y, a questionnaire appears. You
must complete the questionnaire to use the BBS on your first call.
10. Press ENTER until the main menu appears. From the main menu
you have access to two areas: the File Menu and News. For help
with menu commands, type ?.
11. In the Main Menu, type F and press ENTER to access the File
Menu, then type D and press ENTER to download.
12. At the file name prompt, type zdxhelp.hlp and press ENTER.
13. Press ENTER twice more.
14. Type Z and press ENTER to select the Zmodem transfer protocol.
15. The download begins automatically. As the file is copied to the
HyperTerminal folder, a dialog box reports on the progress of the
download. If the download fails, your baud rate may be set too high.
Log off, set the COM port baud rate lower, and call again.
16. To log off the BBS, press ENTER, type G for "good-bye," and press
ENTER twice more.
17. In the HyperTerminal window, click File, then click Save to save the
HyperTerminal connection description.
2 Quick Start
17