Running Multimodemzdx Help - Multitech MT2834ZDX Quick Reference Manual

10. Type X and press ENTER to select the Xmodem transfer protocol.
11. To begin the download in Terminal, click Transfers, then click
Receive binary file. Next, select the destination directory, type the
file name (zdxhelp.hlp), and click OK. If the download fails, your
baud rate may be set too high. Log off, set the COM port baud rate
lower, and call again.
12. To log off the BBS, press ENTER, type G for "good-bye," and press
ENTER twice more.

Running MultiModemZDX Help

Windows 95, 98, or NT 4.0
1. Open the folder into which you downloaded the ZDXHELP.HLP file.
2. Move the file to a permanent location on your hard drive.
3. Double-click on the Zdxhelp icon to run MultiModemZDX Help.
4. Press F1 for help in using MultiModemZDX Help.
Windows 3.x
1. Open the directory into which you downloaded the ZDXHELP.HLP file.
2. Move the file to a permanent location on your hard drive.
3. In File Manager, select ZDXHELP.HLP, then click on File, Associate.
4. In the Associate With box, type winhelp.exe, and then click OK.
5. Double-click on the ZDXHELP.HLP file name to run it.
6. To create an icon for easier access to MultiModemZDX Help, drag
the ZDXHELP.HLP file name from File Manager into any Windows
program group, such as Main.
2 Quick Start
19