Multitech MT5634MU User Manual page 70

MultiMobile USB User Guide
click Next>.
d. The Step 1 of 3: Internet account connection information dialog box is displayed. Enter
the Area code, Telephone number and Country/region name and code for your Internet Service
Provider's access number.
e. Click the Advanced tab to access options for selecting your connection type and logon
procedures. Your ISP should provide this information for your account. If you are not sure
which connection type to choose, try PPP.
Although many ISPs automatically provide an IP address for your machine and their Domain
Name Server (DNS) each time you connect to them, some ISPs do not. If your ISP provided
IP addresses to you, click the Addresses tab. In the IP Address
use the following:, and enter the IP addresses into the appropriate boxes. Click OK to return
to Step 1 of 3: Internet account connection, and click Next>.
Note: If your machine has a network adapter installed, do not enter this address in the address
box. Enter the IP address provided by your ISP.
f. The Step 2 of 3: Internet account logon information dialog box is displayed. Enter the
user name and password you will use for your Internet account. Click Next>.
g. The Step 3 of 3: Configuring your computer dialog box is displayed. In the box provided,
enter a descriptive name for this connection and click Next >.
h. You are then asked if you would like to set up an Internet mail account. You may select Yes
or No. If you select yes, you will be asked to provide specific information about your mail
service. In this example, No is selected. Click Next>.
i. The Completing the Internet Connection Wizard is displayed. Click Finish.
If you select Connect to a private network through the Internet:
a. In the box provided, enter the Host name or IP address belonging to the computer to which you
are calling. Contact the network administrator for the device to which you are connecting to
obtain this information. Click Next> to continue.
b. The Connection Availability dialog box is displayed. If you are creating this connection for
multiple users, select Create this connection for all users. If this connection will be used
only by you, select Create this connection only for myself. Click Next> to continue.
c. The Completing the Network Connection Wizard dialog box is displayed. You are
prompted for a name to use for this connection. Enter a meaningful name in the box provided.
Click Finish.
If you select Accept incoming connections:
This option allows another computer to create a virtual connection to your computer through the
Internet, other public network or a direct cable. Virtual Private connections to your computer through
the Internet are possible only if your computer has a known name or IP address on the Internet.
a. The Devices for Incoming Connections dialog box is displayed. Select your Multi-Tech
System modem and click Next>.
b. At the Incoming Virtual Private Connection dialog box, select either Allow virtual
private connection or Do not allow virtual private connection.
c. The Allowed Users dialog box is displayed. Next, you can Add or Delete users you will
allow to connect to this device. Click Next>.
d. In the Networking Components dialog box, select the boxes next to the name of each
networking component you want to enable for incoming connections. Click Next>.
e. The Completing the Network Connection Wizard dialog box is displayed. In the box
70
section, select Always