Table of Contents
Advertisement
114
CONNECT 54666
115
CONNECT 25333
116
CONNECT 26666
* EC is added to these result codes when the extended result codes configuration option is enabled. EC is
replaced by one of the following codes, depending on the type of error control connection:
V42bis – V.42 error control (LAP-M) and V.42bis data compression
V42 – V.42 error control (LAP-M) only
MNP5 – MNP 4 error control and MNP 5 data compression
MNP4 – MNP 4 error control only
NoEC – No error control protocol).
Multi-Tech Systems, Inc. MultiAccess ACS User Guide
Connected at 54666 bps
Connected at 25333 bps
Connected at 26666 bps
Appendix F – Modem AT Commands
69
Advertisement
Table of Contents
