Power Management Setup; Power Management Setup Screen - Multitech IAC-F696 User Manual

Power Management Setup

The Power Management Setup controls the CPU card's Green features. When you select the
POWER MANAGEMENT SETUP on the main program, the screen display will appears as:

Power Management Setup Screen

Phoenix - Award BIOS CMOS Setup Utility
Power Management Setup
ACPI function
Power Management
Video Off In Suspend
Video Off Method
Soft-Off by PWRBTN
********** Power On Events
Power On by LAN/Ring
Power On by RTC Alarm
Date (of Month)
Resume Time (hh:mm:ss)
PwrOn After AC Power
Lose
Move Enter: Select +/-/PU/PD: Value
F5: Previous Values
The following explains the options for each of the features as listed in the above menu:
ACPI Function: This item allows you to enable or disable the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Power Management:
Min. Power Saving
Max. Power Saving
User Defined
Video Off In Suspend: This determines the manner in which the monitor in which the monitor is blacked.
The setting are YES and
Video Off Method: This determines the manner in which the monitor is blanked. The default setting is
V/H SYNC+Blank.
V/H SYNC+Blank
Blank Screen
DPMS
Soft-Off by PWRBTN: Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state. The settings are: Delay 4 Sec., and Instant-Off.
Power On by LAN/Ring: When Enabled, an input signal on the serial LAN/Ring Indicator (RI) line (in
other words, an incoming call on the modem) awakens the system from a soft off
Power On by RTC Alarm: Power-on interval by RTC setting.
PwrOn After AC Power Lose: This option specifies the Power ON/OFF Status after AC power
Multi-Tech Systems, Inc. Single Board Computer IAC-F696 User's Guide (S000349A)
[Disabled]
[Press Enter]
[Suspend -> Off]
[DPMS]
[Instant-Off]
*********
[Disabled]
[Disabled]
0
0:0:2
[On]
F7: Optimized Defaults
Minimum power management. Doze Mode=1hr. Standby Mode =1hr.,
Suspend Mode=1hr., and HDD Power Down=15min.
Maximum power management. –Only available for SL CPU's. Doze
Mode=1min., Standby Mode=1min., Suspend Mode=1min., and HDD
Power Down=1min.
Allows you to set each mode individually. When not disabled, each of
the ranges is from 1 min. to 1 hr. except for HDD Power Down which
ranges from 1 min. to 15 min. and disabled.
NO.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blank to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
Item Help
Menu Level
F10: Save Esc: Exit
Chapter 3- BIOS Setup
F1: General Help
state.
loss.
36