Radius Authentication & User Profile Software; Requirements; Installing Radius Login Authentication Software - Multitech CommPlete 4000 Quick Start Manual

RADIUS Authentication & User Profile Software

Requirements

Radius Server requires a 486-66 MHz or faster computer, preferably running Microsoft Windows NT
Server. The computer should have a hard disk, a CD-ROM drive, and LAN or WAN access. Radius
Server requires approximately 420 kB on the hard disk and space for the user database.

Installing Radius Login Authentication Software

MultiTech's Radius software allows the CommPlete 4000 RAS Server to operate in conjunction with a
general LAN server.
1. On the Radius Server computer, exit all Windows programs except Windows Explorer.
2. Insert the compact disc supplied with your Multi-Tech Systems communications server into the
computer's CD-ROM drive.
3. If Autorun does not display the installation menu, find Autorun.exe in the root folder of the
compact disc, and double-click it. The installation menu appears.
4. In the Select Software to Install dialog box, select Radius.
The Multi-Tech Radius Server Setup wizard will appear.
5. Follow the instructions in the Setup wizard to install Radius Server.
6. When the Settings dialog box appears, click OK. The default values are appropriate in most
cases. Descriptions of each field on the Settings dialog box can be viewed in the section
"Radius Server Properties" directly following this procedure. Also, you can change these
settings at any time when Radius Server is running.
7. Click Finish.
8. Re-boot the computer. By default, Multi-Tech Radius Service runs automatically on startup. If
for any reason the Radius program was shut down, you can launch the program manually from
the Windows "Start" menu.
9. To shut down the Radius program, click on the Radius icon at the lower left of the PC screen.
CommPlete 4000 Communications Server Quick Start Guide
RADIUS Authentication & User Profile Software
19