Table of Contents
Advertisement
FCS-3
FAQ
§
Parts are getting very hot and/or start to smoke.
!
Disconnect the system from the mains immediately!
Possible cause: The connections to the power supply are connected
the wrong round.
à Check the connection. In this case the module is probably
damaged irreparably.
§
The LEDs do not light / flash.
Possible cause: The LEDs are connected the wrong round. à Check
the connections.
Possible cause: The power supply is interrupted. à Check the
connections.
§
The vehicle does not drive.
Possible cause: The wrong connecting point at side B of the existing
reed contact was used. à Check the connection.
§
The vehicle drives backwards.
Possible cause: The connections of the motor are connected
reverse. à Check the connections.
If you cannot find the problem, please return the module for repair
(address on the cover page).
Manufacturer's note
According to DIN VDE 0869, the person who assembles and/or mounts
a circuit in its' casing is the manufacturer of the product. If he sells the
product to another person he is responsible for passing on all the
relevant papers and his name and address.
Certification
This product conforms with the EC- directive 89/336/EWG on
electromagnetic radiation and is therefore CE certified.
English
Seite 31
Advertisement
Table of Contents
