Table of Contents
Advertisement
3.3.2
Shipping and Storing the Cabinet
Save the original shipping container and packing materials in case you need to store
or ship your cabinet.
If you cannot store the shipping materials, recycle or dispose of the materials
properly. Consult your local recycling authority for information.
3.4
Connecting Power Cables to the Sun Fire
Cabinet
1. Turn off each redundant transfer switch (RTS) (
Note – In a dual RTU configuration there will be power switches in both the front
and rear of the cabinet. All power switches should be turned off.
FIGURE 3-8
2. Remove the power cables from the shipping carton.
3. Remove the socket covers on each RTS module.
4. Release the catches and remove the kick-panel.
The kick-panel snaps off.
5. Release the catches and extend the anti-tilt bar at the front of the cabinet.
This step applies only to two RTU assembly configurations.
3-8
Sun Fire Cabinet Installation and Reference Manual • October 2001
RTS Power Switch on the Sun Fire Cabinet
).
FIGURE 3-8
Advertisement
Table of Contents
