Table of Contents
Advertisement
Show Last Call
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
Displays the cost of your last chargeable call.
Total For All Calls
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using the
option.
Credit Remaining
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
Displays the difference between your total call costs and the limit
specified by the
Set Total Charge Limit
limit,
No Charge Limit
will be displayed.
Show Call Timers
This feature allows you to display the duration of your calls and to
reset your time meters to zero.
If you receive the Advice of Charge service then all calls are timed.
If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
84
Using the Options Menu
Reset Call Charges
option. If there is no
Show Last Call
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the
Reset All Timers
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
j
Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The Single Alert Timer will sound a beep just once during a
call, after a preset time has elapsed.
• The Repetitive Timer will sound regular beeps during a call, at
preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Set In-Call Display
This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
AIf a total charge limit has been set, then the in-call display
always shows your remaining credit.
option.
Advertisement
Table of Contents
