Motorola P7382i User Manual page 45

Configuring Your WAP settings
1 Scroll to 1>WAP Settings
are presented with the following options:
1 Primary IP:
2 Primary Port:
3 Secondary IP:
4 Secondary Port:
5 Idle Time Out:
2 Scroll to 1>Primary IP:
prompted to enter the IP address, press and hold C to clear
the field and enter the IP address provided by your ISP. (The IP
address is in the format 123.123.123.123.) After entering the
address press O. You will return to the previous screen.
3 Scroll to Primary Port and press O to select it. Press and
hold C to clear the field, enter the number provided by
your ISP, then press O. You will return to the previous
screen.
4 Repeat steps 2 and 3 to select and configure the
and
IP Secondary Port
5 Scroll to
Idle Time Out:
6 Enter the required Idle Time Out and press O. (The default
is currently 600 seconds.) You will return to the previous
screen.
7 Press $ to return to the Profile options screen.
42
Using the Options Menu
, and press O to select it. You
, and press O to select it. When
Secondary
.
and press O to select it.
Configuring the Data Bearer
and press O to select it. You are
Scroll to 2>Data Bearer
presented with the following options:
1 GPRS
2 CSD
Configuring GPRS
and press O to select it. You are presented
1 Scroll to GPRS
with the following options:
1 APN:
2 Username:
3 Password:
and press O to select it. When prompted to
2 Scroll to APN:
enter the APN, press and hold C to clear the field, then
enter the APN provided by your ISP. Press $ to toggle
between the available text entry methods. (See "Entering Text
on Your Phone" on page 50.) After entering the APN, press
O. You will return to the previous screen.
and press O to select it. When
3 Scroll to Username:
prompted to enter the User Name, press and hold C to
clear the field, then enter the User Name provided by your ISP.
Press $ to toggle between the available text entry
methods. (See "Entering Text on Your Phone" on page 50.)
After entering the User Name, press O. You will return to
the previous screen.