Select Phone Line
i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
This option allows you to switch between
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
i Press E followed by the volume button to either
increase or decrease the ringer volume.
j
i Press E. Select the Quick Access feature (L Vibrate
Line 1
and
Line 2
.
This option sets the way your phone alerts you to an incoming
call. The options are:
•
•
•
•
AThe setting you choose also defines the type of alert for an
Ring or Vibrate
On/Off?) or, after the tone, say the Voice Tag name. See
"Voice Control for Quick Access Features" on page 35.
Ring Only
—The phone rings with the tone specified by the
Set Ringer Tone option.
—The phone vibrates using VibraCall
Vibrate Only
Vibrate Then Ring
—The phone vibrates twice and then
rings.
No Ring or Vibrate
—The phone only displays the
message.
incoming SMS message (except that if you select
Then Ring
, your phone will just vibrate).
Using the Options Menu
®
alert.
Call
Vibrate
73