Catalogue www.feiyu-tech.com Product Overview Configuration List Instruction 1.Installation 2.LED status 3.Function Button 4.Using our gimbal to control the follow focus 5.Calibration Route calibration Start point calibration Quit the start point/route calibration 6.Auto focus Auto focus setting Last configuration setting 7.Follow focus Sleep mode /Start and Reset 8.Motor calibration...
fixed thumb screw on the fixed bracket. ④Insert the data cable into the USB port of the fixed plate of AK series gimbal, and the installation is completed...
Using gimbal to control the follow focus (1)After installing the follow focus, please select the ‘Scroll Setting’ ‒ ‘Camera ctrl’ ‒ ‘AKFII’ . Sensitivity 灵敏设置 WL W/T&F/F Payload Capture Setting Mode Camera ctrl A K F I Rotation Auto Time Rotation A K F I I Scroll...
Start point calibration Double tap the function button Start point calibration After doing the route calibration, if the starting point of the follow focus device does not correspond to the near focus of the camera, or the lens position is moved during shutdown, the starting point calibration is needed.
Last configuration setting When you have used auto-focus at least once time, you can use the function of "use last config", click on "Scroll Setting" - "Auto-focus" - "use last config" on the display of the gimabl. After the countdown is completed, the last auto-focus configuration will be automatically executed based on the last- time setting (starting point, terminal point and running time are aligned with last-time’...
Page 8
firmware and use the corresponding user manual. You can get the latest user manual from the official website: www.feiyu-tech.com FeiyuTech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.