Table of Contents
Advertisement
B-2
REAR PANEL (PLEASE SEE FIGURE B.2).
17. INPUT CABLE HOLDING BRACKET
This bracket securely holds the three phase power cables
in place.
19
18
17
FIGURE B.2
18. INPUT BOX
This insulation box is used to cover the input
connections.
19. GROUND LEAD CONNECTION
Connect the ground lead to the paint-free location on
the case back by securing its lug-end with the screw
into the case hole.
WARNING
This insulation box must be secure before turning on
the main power supply.
20. AUX. VOLTAGE RECEPTACLE
Export type machine: This is a 220V 200W max.
auxiliary power output socket, for plugging gas heater.
CAUTION
Only Plug the correct gas heater into this receptacle.
DO NOT plug other electric devices into the
receptacle, otherwise damage may occure to the
OPTIMARC® machine.
21. FUSE AND FUSE HOLDER
Export type machine: 250V 2A fuse is used to protect
the auxiliary 220V power outlet.
OPERATION
20
21
22
OPTIMARC
22. FUSE AND FUSE HOLDER
250V 8A fuse is used to protect the auxiliary power for
the wire feeder.
®
CV355P
B-2
Rev.01
Advertisement
Table of Contents
