Installing The Software - National Instruments USB-9237 User Manual And Specifications

Training Courses
Technical Support on the Web

Installing the Software

Installing Other Software
Example Programs
Installing the NI USB-9237 Device
Installing the NI 9237 in the USB-9162 Carrier
NI USB-9237 User Guide and Specifications
If you need more help getting started developing an application with
NI products, NI offers training courses. To enroll in a course or obtain a
detailed course outline, refer to
For additional support, refer to
Software support for the NI USB-9237 for Windows Vista/XP/2000 is
provided by NI-DAQmx. The DAQ Getting Started Guide, which you can
download at
ni.com/manuals
instructions for installing software and hardware, configuring channels and
tasks, and getting started developing an application.
If you are using other software, refer to the installation instructions that
accompany your software.
The NI-DAQmx CD contains example programs that you can use to get
started programming with the NI USB-9237. Refer to the NI-DAQmx for
USB Devices Getting Started Guide that shipped with your device, and is
also accessible from Start»All Programs»National Instruments»
NI-DAQ, for more information.
Before installing the device, you must install the software you plan to use
with the device. Refer to the Installing the Software section of this guide
and the documentation included with the software for more information.
The NI 9237 module and USB-9162 carrier are packaged separately. Refer
to Figure 3, while completing the following assembly steps:
1. Make sure that no signals are connected to the NI 9237 module and the
USB cable is not connected to the device.
2. Remove the protective cover from the 15-pin D-SUB connector.
ni.com/training
ni.com/support
, offers NI-DAQmx users step-by-step
6
.
or .
zone.ni.com
ni.com