Table of Contents
Advertisement
Note: To have the Line-out connector on the back panel work
properly, you need to place jumpers on pin# 13~16 (MSI spec) or on
pin#5~6 and 9~10 (Intel spec) of the JAUD1 connector. Otherwise,
this Line-out connector will not function and nothing can be heard
through speakers or headphones attached to the Line-out connector
on the back panel. But front panel audio connector is enabled at this
point and allows you to connect speakers or headphones through
front panel.
2
14 16
MSI Spec
1
13 15
(OPEN pin# 13~16)
2
6
Intel Spec
1
5
(OPEN pin# 5~6 and 9~10)
- Disable Line-out connector on the
back panel
- Enable Front Panel Audio
Connector
2
20
1
19
(SHORT pin# 13~16)
10
2
9
1
(SHORT pin# 5~6 and 9~10)
- Enable Line-out connector on the
back panel
- Disable Front Panel Audio
Connector
2-19
Hardware Setup
14 16
20
13 15
19
6
10
5
9
Advertisement
Table of Contents
