Introduction And Safety Instructions; Receipt Of Goods; Checking The Equipment Received - Carrier AQUASNAP 30RBP Installation, Operation And Maintenance Instructions

1 - INTRODUCTION AND SAFETY INSTRUCTIONS

The units are designed to cool water (for coolers) and cool or reheat water (for reversible heat pumps) for the air conditioning and
heating of buildings and industrial processes.
They are designed to provide a very high level of safety and reliability, making installation, start-up, operation and maintenance easier
and safer.
They will provide safe and reliable service if used within their application ranges.
For all safety instructions, please refer to the safety manual. A paper version is delivered with the machine, the digital version is available
in the same place as the IOM, (contact your local distributor).
In addition to this safety manual, the manufacturer states that the unit is designed for a maximum number of 120,000 start-ups.
This product contains fluorinated greenhouse gases governed by the Kyoto protocol (1997) and covered by European
regulation 517/2014 on fluorinated greenhouse gases (Annex I):
■ Refrigerant type: R32
■ Global Warming Potential (GWP): 675 (as per AR4)

2 - RECEIPT OF GOODS

2.1 - Checking the equipment received

Check that the unit and the accessories have not been damaged during transport and that no parts are missing. If the unit and the
accessories have been damaged or the shipment is incomplete, send a claim to the shipping company.
Compare the name plate data with the order.
The name plate is attached in two places to the unit:
■ On one side of the unit exterior,
■ On the inside of the electrical panel door.
5