Mains Signaling Voltage (Msv); Function Description; Configuration And Value View Via The User Interface - Siemens SICAM Q100 7KG95 Series Manual

Power Quality

7.10 Mains Signaling Voltage (MSV)

7.10 Mains Signaling Voltage (MSV)

Function Description

7.10.1
Mains signaling voltage (MSV) measurement is performed according to IEC 61000-4-30.
The device detects mains signaling frequencies from 100 Hz to 3 kHz. The threshold for detection and capture
is from 1 % up to 15 % of Un.

Configuration and Value View via the User Interface

7.10.2
Configuration of the Mains Signaling Voltage (MSV)
To change the settings of the MSV in the Configuration tab, proceed as follows:
•
In the navigation window, click Mains signaling voltage.
[sc_q100_MSV, 2, en_US]
Figure 7-24
•
Configure the respective parameters according to the following table.
204
Configuration Tab, Mains Signaling Voltage
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021