Advertisement
Body Wiring Diagram
High-Voltage Power Amplifier Operation
The high-voltage power amplifier and lights will turn on when the ESC is powered on. Press the Mode Select button on the amplifier to toggle through
the three lighting modes (Mode 1: Low Beam (default), Mode 2: High Beam, Mode 3: Daytime). The chart below indicates how the lights will function in
each mode.
Connector
Channel
Default Connection
1
Low Beam Headlights (front bumper light bar)
A
2
High Beam Headlights (front bumper light bar)
3
Low Beam Headlights (front roof light bar)
B
4
High Beam Headlights (front roof light bar)
5
Tail Lights
C
6
Brake Lights
7
Reverse Lights
D
8
Not used
Change the high-voltage power amplifier settings and gain access to
additional functions using the Traxxas Link App (available in the Apple
App Store
or on Google Play™). The TQi transmitter with the Traxxas
SM
Link Wireless Module (part #6511, sold separately) are required.
This device complies with FCC Part 15 & IC RSS-210 rules subject to the following
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept all interference received, including interference that may cause undesired operation.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Warranty Information
Traxxas electronic components are warranted to be free from defects
in materials and workmanship for a period of 30 days from the date of
purchase.
Limitations: Any and all warranty coverage does not cover replacement
of parts and components damaged by abuse, neglect, improper or
unreasonable use, crash damage, water or excessive moisture, chemical
damage, improper or infrequent maintenance, accident, unauthorized
alteration or modification or items that are considered consumable.
Traxxas will not pay for the cost of shipping or transportation of a defective
component to us.
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
To breakaway cable adapter on chassis brace (T-Bar)
Mode 1
Low Beam Mode
On
Off
On
Off
On
On when braking
On when reversing
N/A
T R AXXAS .co m
Chassis Wiring Diagram
From High-Voltage Power Amplifier on body
Mode 2
Mode 3
High Beam Mode
Daytime Mode
Off
Off
On
Off
Off
Off
On
Off
On
Off
On when braking
On when braking
On when reversing On when reversing
N/A
N/A
Replacement Parts
Part #
Description
6590
High-Voltage Power Amplifier
9691
Skid plate, roof (body) (with LED lights) (fits #9511 body)
9692
Bumper, front (body) (with LED lights)/ bumper mount (fits
#9511 body)
9693
Breakaway cable, LED lights (high-voltage)
Traxxas Lifetime Electronics Warranty
After the expiration date of the warranty period, Traxxas will repair
electronic components for a flat rate. The covered repairs are limited to
non-mechanical components that have NOT been subjected to abuse,
misuse, or neglect. Products damaged by intentional abuse, misuse,
or neglect may be subject to additional charges. Traxxas liability, in no
case, shall be greater than the actual purchase price of this product. For
replacement, product must be returned in brand new condition, with
packaging and itemized sales receipt.
Breakaway Cable
Adapter Wiring
Mode Select Button
Advertisement
