Lincoln CORSAIR 2023 Owner's Manual page 407

Note: If you are using a jump pack or booster
box, follow the manufacturer's instructions.
1
3
E142664
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM
Crash and Breakdown Information
1. Pull the red rubber boot backward.
Connect the positive (+) jumper cable to
the positive (+) terminal of the discharged
battery.
2. Connect the other end of the positive (+)
jumper cable to the positive (+) terminal
of the booster vehicle battery.
3. Connect the negative (-) jumper cable to
the negative (-) terminal of the booster
vehicle battery.
4. Make the final connection of the negative
(-) jumper cable to an exposed metal part
of the disabled vehicle's engine, as
4
shown in the following illustration, away
from the battery and fuel injection
2
system, or connect the negative (-)
jumper cable to a ground connection
point if available.
Starting the Engine
1. Start the engine of the booster vehicle
2. Start the engine of the disabled vehicle.
3. Once you start the disabled vehicle, run
403
E379441
and moderately rev the engine, or gently
press the accelerator to keep the engine
speed between 2000 RPM and 3000
RPM, as shown in your tachometer.
both vehicle engines for an additional
three minutes before disconnecting the
jumper cables.