Exterior Lamps - Lincoln CORSAIR 2023 Owner's Manual

Table of Contents

Advertisement

EXTERIOR LAMPS

USING THE TURN SIGNAL LAMPS
E273180
Push the lever up or down to
E67018
switch the turn signal lamps on.
Set the lever to the middle position to switch
the turn signal lamps off.
Note: Tap the lever up or down to make the
turn signal lamps flash three times.
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM
Exterior Lighting
Turn Signal Lamp Indicator
It flashes when you switch the turn
E67018
signal lamps on.
Note: An increase in the rate of flashing
warns of a failed turn signal lamp.
SWITCHING THE DAYTIME RUNNING
LAMPS ON AND OFF - VEHICLES
WITH: CONFIGURABLE DAYTIME
RUNNING LAMPS
WARNING: The daytime running
lamps system does not activate the rear
lamps and may not provide adequate
lighting during low visibility driving
conditions. Make sure you switch the
headlamps on, as appropriate, during all
low visibility conditions. Failure to do so
may result in a crash.
1. Using the instrument cluster controls on
the steering wheel, select Settings.
2. Select Vehicle.
3. Select Lighting.
120
4. Switch Daytime Running Lights on or
off.
The daytime running lamps turn on when all
of the following occur:
You switch the system on.
You switch your vehicle on.
The transmission is not in park (P) for
vehicles with automatic transmissions or
you release the parking brake for
vehicles with manual transmissions.
The lighting control is in the autolamps
position.
The headlamps are off.
Note: Other lighting control positions do not
turn on the daytime running lamps.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents