Toro Greensmaster eFlex 1800 Diagnostic Manual page 136

TEC-2401 Harness Connector P01 and P02 Pin Detail (cont'd.)
Pin Pin type
P2-6 Input, voltage
P2-7 Ground (harness)
P2-8 Ground (harness)
P2-9
Input, digital high/low
P2-10 Input, digital high/low
P2-11 Input, digital high/low
P2-12 Input, digital high/low
Wire color Description
White (W) Power Logic
Black (BK) Ground
Black (BK) Ground
Yellow (Y) Reduce Mow Speed
(EZ-Turn/Slow-in-Turn)
Tan (T) Traction Prox SW NO
Brown (BN) Not used
Not used Not used
Detail
Power from battery pack after battery pack safety
checks, and Battery Pack Wake Up Start sequence
has completed successfully with a Master TEC
CAN Stay/Keep Alive signal.
Harness ground
Harness ground
12 Vdc potential when the key switch is in the R
position; Waiting for ground through key switch
and proximity sensor. Speed control demands of
more than 50% result in an EZ-Turn reduction in
speed of 60%. 12 Vdc Low state indicates digital
On/Active.
12 Vdc potential when the key switch is in the R
position; Waiting for flag to close proximity sensor.
12 Vdc Low state indicates digital On/Active.
Not used
Not used
136
UN
UN