Technical Specifications - Siemens SIMATIC ET 200AL Equipment Manual

Technical specifications

6.1 Technical specifications
Technical specifications of the DQ 8x24VDC/2A 8xM12 digital output module
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7142-5AF00-0BA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Product function
• I&M data
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
• STEP 7 configurable/integrated from ver-
sion
• PROFIBUS from GSD version/GSD revision
• PROFINET from GSD version/GSD revision
Supply voltage
Load voltage 1L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Load voltage 2L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
22
6ES7142-5AF00-0BA0
DQ 8x24VDC/2A
FS03
V1.0.x
Yes; I&M0 to I&M3
STEP 7 V13 SP1 or higher
V5.5 SP4 Hotfix 7 or higher
GSD as of Revision 5
GSDML V2.3.1
24 V
20.4 V
28.8 V
Yes; against destruction; load increasing
24 V
20.4 V
28.8 V
Yes; against destruction; load increasing
40 mA; without load
4 A; Maximum value
4 A; Maximum value
Digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36683723-AB
6