Zoom G2 FOUR Manual page 70

Notes about the looper tempo
• The looper tempo is also used by effects and rhythms.
• The tempo can be set as explained in
• Changing the tempo will delete recorded loops in the following cases.
- If the looper recording time is set to ♩×1–64
- If a rhythm is playing
NOTE:
• If the rhythm pre-count function is on, recording will start after the pre-count.
effect)
• Sound input through the AUX IN jack will not be recorded.
HINT:
During rhythm playback
not exact, the loop will automatically be adjusted so that loop playback stays in time.
"Adjusting the
(→ Using
rhythms)
(→ Using
rhythms), quantization is enabled so even if the recording ending time is
tempo".
(→ Setting the recording
70
time)
(→ Setting the rhythm