Zoom G2 FOUR Manual page 16

2.
Use and
See the reference links for details about each setting.
Change the effect order.
(→ Changing the order of
Save and copy patch memories.
(→ Copying and saving patch
memories)
Select the type of equipment
connected to the G2 FOUR/G2X
FOUR output.
of connected
Turn the pre-selection function
on/off.
function)
Turn on/off showing of the output
setting at start-up.
start-up
Restore factory default settings.
(→ Restoring factory default
settings)
Check the firmware versions.
(→ Checking the firmware
3.
Press a –
This opens the selected settings screen.
For example, press
to show the icon for the desired setting item.
effects)
(→ Selecting the type
equipment)
(→ Using the PRESELECT
(→ Changing the
setting)
versions)
footswitch that corresponds to an icon.
when OUTPUT is selected.
Change the patch memory name.
(→ Changing patch memory
Delete patch memories.
patch
Turn the automatic saving function
on/off.
function)
Turn the ECO mode on/off.
(→ Setting the ECO
Adjust the display contrast.
(→ Adjusting the display
Adjust the sensitivity of the built-in
expression pedal. (G2X FOUR only)
(→ Calibrating the pedal (G2X FOUR
only))
16
(→ Deleting
memories)
(→ Setting the AUTO SAVE
mode)
contrast)
names)