Microtek ScanMaker i800 Scanning Manual page 15

11. Click the Scan (or "Batch") button in the Preview window to start scanning.
• If ScanWizard Pro was launched from an application program, the image is then
• If ScanWizard Pro was launched in stand-alone mode, you will be prompted to
Before
After
delivered to your application, where the image can be saved, printed, or edited.
Note: In Mac OS X, you will be prompted to specify the file attributes for the
scanned image before scanning takes place.
specify the file attributes for the scanned image after the Scan or Batch
button is pressed, such as entering the file name, specifying a folder name of
your own, etc. When you have completed the settings, press the Done/Save
button, and the scanner will automatically scan and save your image based on
your settings.
ScanMaker i800 Pro Scanning Guide 15