Scanning 35Mm Filmstrips - Microtek ScanMaker 6000 Supplementary Manual

Microtek scanmaker 6000: supplementary guide

Hide thumbs Also See for ScanMaker 6000:

Table of Contents

ScanMaker 6000 Supplement

Scanning 35mm Filmstrips

1. Turn the LightLid 35 over. Load the filmstrip into the recessed area of the LightLid

35, making sure that one side of the filmstrip is tucked under the mylar sheets,

with the film's shiny base facing up.

For added stability, secure the other perforated side of the filmstrip with a piece of

adhesive tape.

Mylar sheets

2. Place the LightLid 35 with the loaded film on the scan bed. The LightLid 35 can be

placed horizontally at the front edge of the scanner glass bed, or vertically

anywhere on the glass surface, as shown below.

Horizontal

3. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the

ScanWizard 5 Standard Control Panel.

When ScanWizard 5 launches, it automatically performs a fast preview of the

material on your scanner glass surface and displays it in the preview area.

Vertical

Table of Contents

Show Quick Links

Table of Contents