Table Of Contents; Declaration Of Conformity; General Safety Instructions; Special Safety Instructions - Metabo PE 12-175 Instructions For Use Manual
Hide thumbs
Also See for PE 12-175:
- Original instructions manual (96 pages) ,
- Original instruction (84 pages) ,
- Instructions for use manual (29 pages)
Table of Contents
Advertisement
Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool is
carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
2 Specified Conditions of Use
1
Declaration of Conformity
We hereby declare at our sole responsibility that
this product conforms to the standards and
normative documents mentioned on page 2.
2
Specified
Use
The machine is suitable for
• sanding wood, plastics and similar materials,
• sanding of grouted and varnished surfaces and
• polishing.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3
General
Safety Instructions
Before using this power tool, completely read and
familiarise yourself with the enclosed safety
information (red booklet) and the instructions for
use. Keep all enclosed documentation on the
power tool for future reference, and pass on to
the next owner of this equipment.
4
Special
Safety Instructions
For your own protection and for the
protection of your power tool pay
attention to all parts of the text that
are marked with this symbol!
During machining, of metals
in particular, conductive dust
can form deposits inside the
machine. This can lead to the
transfer of electrical energy onto the machine
housing. This can mean a temporary danger of
electric shocks. This is why it is necessary when
the machine is running to blow compressed air
through the rear ventilation slots of the machine
regularly, frequently and thoroughly. Here, the
machine must be held firmly.
It is advisable to superpose a residual current
operated device (FI circuit-breaker) with a max.
breaking current of (30 mA).
When the machine is shut down via the FI circuit-
breaker, it must be checked and cleaned.
Cleaning the motor, see Maintenance.
The dust created when working is often harmful to
health (e.g. when working with oak and beech,
stone, or paint coats which may contain lead or
other harmful substances). This dust must not be
allowed to enter your body. Use a dust extractor
and in addition wear a suitable dust protection
mask.
Thoroughly remove any dust deposits, e.g. by
cleaning with a suitable vacuum cleaner. Dust is
potentially explosive!
ENGLISH
9
Advertisement
Table of Contents
