Installing A Security Cable; Turning On The Monitor - HP Z32k G3 User Manual

Hide thumbs Also See for Z32k G3:

Table of Contents

Installing a security cable

As a security measure, you can secure the monitor to a fixed object with an optional security cable available

from HP. Use the key that came with the optional security cable to attach and remove the lock.

This section provides important information about preventing damage to your monitor, startup indicators,

and troubleshooting information.

IMPORTANT:

screen for 12 or more hours. To avoid burn-in image damage, you should always activate a screen saver

application or turn off the monitor when it will not be in use for a prolonged period of time. Image retention

is a condition that might occur on all LCD screens. Burn-in damage on the monitor is not covered under the

HP warranty.

NOTE:

If pressing the power button has no effect, the Power Button Lockout feature might be enabled. To

disable this feature, press and hold the monitor power button for 10 seconds.

NOTE:

On select HP monitors, you can disable the power light in the OSD menu. Press the

open the OSD, select Power, select Power LED, and then select Off.

Press the button on the monitor to turn it on. (Be sure that the master power switch is in the On position).

■

Burn-in image damage might occur on monitors that display the same static image on the

button to

Installing a security cable

Table of Contents