Table of Contents
Advertisement
1.
Remove the two screws from the VESA holes located on the rear of the monitor head (1), and then
remove the screw fastener (2).
2.
Align the VESA adapter with the screw holes located on the rear of the monitor head (1), and then install
the two screws to secure the adapter (2).
NOTE:
3.
To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the VESA screw holes on the back of the monitor
head.
IMPORTANT:
manufacturer's instructions when mounting the monitor to a wall or swing arm.
10
Chapter 1 Getting started
The adapter attaches only after you lower the stand mount to the correct position.
If these instructions do not apply to your device, then follow the mounting device
Advertisement
Table of Contents
