Table of Contents
Advertisement
There are 2 types of KVM connections:
Thunderbolt uses a Thunderbolt or USB Type-C cable only.
●
USB Type-B uses a USB Type-B cable for USB data transfer and to connect with HDMI or DisplayPort for
●
video transfer.
The KVM function uses the current video input port. If the first computer is disconnected, the KVM setting
switches to the powered-on second computer.
If two active computers are connected, the KVM function can be quickly switched by pressing the OSD
Input
button (1).
In PbP mode, to activate the KVM function for two active computers, follow the instructions to first enable PbP
mode (see
Using PiP and PbP on page
time. Next, you can quickly switch hosts by pressing the OSD
20
Chapter 2 Connecting a second computer to the monitor using the KVM function
24). Two video inputs will be shown picture by picture at the same
USB host swap
button (1).
Next
Advertisement
Table of Contents
