Special Instructions For Use - Panasonic HMs700 Series Instruction Manual

Hide thumbs Also See for HMs700 Series:
Table of Contents

Advertisement

3.

Special instructions for use

• The product shall only be used in an area of not more than pollution degree 2, as defined in
IEC/EN 60664-1.
• The product shall be installed in an enclosure that provides a degree of protection not less than
IP54 in accordance with IEC/EN 60079-15.
• Transient protection shall be provided that is set at a level not exceeding 140% of the peak rated
voltage value at the supply terminals to the product.
• Install the product according to the accompanying installation instructions.
• Ground the product according to the accompanying installation instructions.
• Only qualified personnel may install or repair the product.
• Care shall be taken to avoid that layers of dust form on the touch terminals in a way that might
cause the accumulation of static charges.
• Keep the faceplate of the product clean. The product must be cleaned only with a soft cloth and
neutral soap product. Do not use solvents.
• This product should not be used for purposes and methods other than indicated in this document
and in the documentation accompanying the product.
ACGM0198V3EN Version 3.0
Special instructions for use
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hms705Hms707Hms710Hms715Hms721

Table of Contents