Table of Contents
Advertisement
Touch screen calibration
14. Touch screen calibration
The HMe series panels support the calibration of the interface. To start calibration do the following:
•
Tap on the surface of the touch screen during the power-up phase of the panel. The tapping frequen-
cy must be high. Start tapping the touch screen as soon as power has been supplied to the panel.
The message "TAP-TAP DETECTED" appears when the operating sequence has been recognized.
•
Release the touch screen and wait a few seconds until the message "ENTERING SYSTEM SET-
TINGS" appears.
•
Touch and hold the touch screen for a few seconds to select "TOUCHSCREEN CALIBRATION".
15. Unpacking and packing instructions
To repack the product, please follow the instructions backwards.
24
Hide quick links:
Advertisement
Table of Contents
