Applique Work - Toyota 9600 Instruction Book

21. APPLIQUE WORK

Set machine as shown.
Draw design on material to be used as an applique
and cut it out.
Place cut-out on base material and baste it.
Sew around outline with zigzag stitch adjusting
stitch length and width according to shape and size
of cut.out and type of base material.
To change direction at corners, or to sew very small
circles, stop machine, positioning needle just away
from edge of cut-out, lift presser foot and turn
material.
Lower presser foot and continue sewing.
Sew a few stitches at end with zigzag width at O.
This is to prevent unstitching.
-31-
2.5-6.5
0.4-2