Winding Bobbin - Toyota 9600 Instruction Book

E. Winding Bobbin
(1) Pull up spool pin.
(2) Put spool on spool pin. Draw thread from spool
pin through thread guide as following number CD
and
@
Q).
(3) Wind thread clockwise around bobbin several
times.
(4) Push in bobbin as far as it will go.
(5) Push bobbin towards hardwheel and press
down foot controller.
Do not put your fingers near needle as needle
may move a little when starting to wind bobbin.
Never push spindle towards handwheel while
sewing.
When bobbin winder spindle at right position
not turn it by handle, also even if press the foot
controller, the machine not move.
(6) Machine stops automatically when winding is
finished.
Return spindle by pushing it in direction of arrow.
-7-