Aux And Radio Mode - Coby CSMP162 Instruction Manual

Aux and Radio Mode

To listen to the radio, please follow these instructions:
1. Press POWER to turn on the system.
2. Press MODE to select AM or FM radio band.
Frequency will display on screen.
3. Use the [ + ] or [ – ] controls to select the desired
radio frequency.
4. Adjust the volume using the Volume pad on the unit
or the remote control.
To scan up or down for the next available frequency,
press and hold the [ + ] / [ – ] controls for approximate-
ly one second. Frequency will scan to the next station
automatically.
To listen to an audio device via the Auxiliary Input feature,
please follow these instructions:
1. Connect the desired audio source to the 3.5mm
Auxiliary Input socket located on the rear panel of
the system.
2. Press POWER to turn on the system.
3. Press MODE to select the AUX mode.
4. Use the controls on the external audio source to
begin playback.
5. Adjust the volume using the Volume pad on the unit
or remote control.
Page 8 Coby Electronics Corporation