To Activate The Alarm - Coby CSMP162 Instruction Manual

Alarm Mode
To set the alarm type:
1. Press and hold the MODE pad until the display
flashes the current alarm type (iPod, FM, AM or BEEP).
2. Press the MODE pad until you have reached the
desired alarm type. Wait for the display indicator to
stop flashing, indicating that the alarm type is set.
You may also select the alarm type by pressing the
ALARM MODE button on your remote control.
Once you have set an alarm, the Alarm Signal
Format indicator will illuminate along with the
audio mode when the speaker system is in use.
(E.g. When alarm is set to RADIO type and system
is playing iPod audio, both the iPod and RADIO
logos will display on screen.)

To activate the alarm

Once your alarms are set, they can be activated in any
combination (ALARM 1 only, ALARM 2 only, or ALARM 1 &
2). To activate the alarms:
Press the SET pad on the system, or the ALARM key

on the remote control. The screen will display the
ALARM 1 time for three seconds. The 'A1' symbol will
continue to display, indicating that ALARM 1 has been
selected.
To select ALARM 2 or ALARM 1 & 2, press the SET pad

until the display indicates that the desired alarm is
selected.
www.cobyusa.com Page 11