Table of Contents
Advertisement
AUXILIARY (AUX) FUNCTION
Play any external audio device (e.g., MP3, cassette player, etc.) when
it is connected to your CS-MP150.
Basic Operation
1.
Use the Line-In cable to connect an external auxiliary audio
device to your CS-MP150's Auxiliary Audio Line-In jack.
2.
Turn the player on. To enter AUX mode, press AUX on the
remote (or press AUDIO on the main unit to toggle between
iPod and AUX modes).
3.
Use the controls on your external device to start playback.
You must use the external audio device to control play-
back
To avoid distortion, do not set the volume from the exter-
nal audio device to very high levels.
Page 1
Coby Electronics Corporation
Advertisement
Table of Contents
