Coby CSMP162 Instruction Manual page 15

Troubleshooting
If you experience problems while attempting to

use the remote control, check that the batteries are
inserted and fully charged.
Please refer to the table below for common troubleshoot-
ing techniques.
Problem
No audio/ no
display
Display
functioning,
but no audio
www.cobyusa.com
Cause
Power is not con-
nected
Unit is not turned on
Faulty plug pack
power supply
Incorrect audio mode
selected
Volume turned down
on unit
iPod not connected
properly
Faulty equipment
(speaker, iPod, dock
connection)
Solution
Connect power and
recheck system
Turn unit on and
recheck system
Contact manufacturer
for a replacement plug
Select correct audio
mode
Adjust volume using
+/– controls on unit
Remove iPod from dock
and reconnect
Contact manufacturer
Page 15