System Overview; Installation - Husqvarna CEORA Quick Manual

QUICK GUIDE
A

System overview

CEROA™ is a robotic lawn mower that contains a drive
unit and a cutting deck. The movement pattern of the
product is systematic to efficiently cut large areas. The
product is using the EPOS (Exact Positioning Operating
System) technology with satellite signals for navigation
and there is no need for boundary wires.
The system contains a robotic lawn mower, a charging
station and a reference station. The robotic lawn mower
and the reference station receive satellite signals for
positioning. The reference station is stationary and
sends correction data to the robotic lawn mower to get
an accurate position for the robotic lawn mower. The
work area is made virtually in an app by operating the
product and adding waypoints to make a map in an app.
1. Navigation satellites
2. Satellite signals
3. Reference station
4. Correction data
5. Charging station
6. Virtual boundary
7. Stay-out zone
8. Work area
9. Mobile device
10. Docking point
11. Transport Path
12. Robotic lawn mower
13. Maintenance point
For a complete map installation a work area and a
charging station are necessary. A work area is an area
where the product can operate and cut grass
automatically. A work area is specified by virtual
boundaries. The charging station can be put in the work
area or near the work area that is connected to it with a
transport path. A transport path is a specified path
between the docking point and a work area. The product
can operate automatically in this path, but does not cut
grass. Stay-out zones can be made if there are areas
where the product is not allowed to operate. A stay-out
zone is specified by virtual boundaries. A maintenance
point is a specified position where the product can be
parked at.
QG_P3 CEORA_1142324.indd 3 QG_P3 CEORA_1142324.indd 3
B
Connectivity
a. Automower® Connect app is used for settings and daily
operation of the product.
b. Husqvarna Fleet Services™ is a cloud solution that gives
the commercial fleet manager an updated overview of all
the products. This is available both as a web service and
as an app.
C

Installation

The reference station and the robotic lawn mower need
unimpeded sky view to be able to operate reliable
without stops.
1. Install the Automower® Connect app and Husqvarna
Fleet Services™ app to your mobile device. Download the
apps from App Store or Google play.
2. Install the reference station. Refer to Operator's manual
for the reference station.
3. Install the charging station.
4. Attach the cutting deck to the drive unit.
5. Pair the robotic lawn mower with the app. Do the basic
setting in the app to pair the robotic lawn mower with the
reference station and the charging station.
6. Specify the work area by operating the product clockwise
with appDrive around the work area and adding
waypoints on the map in the app.
7. Specify the stay-out zones by operating the product
counterclockwise with appDrive around the stay out zone
and adding waypoints on the map in the app.
8. Specify the transport path by starting in the work area
and operate the product with appDrive and adding
waypoints on the map in an app. When saving the
transport path it is connected to the docking point.
9. Specify the maintenance point and make a path to the
charging station. Start at the maintenance point and
operate the product with appDrive to add waypoints on
the map in the app. The path to the charging station is
connected to the docking point when you save the
maintenance point.
10. Use the app to adjust the schedule and the settings for
the robotic lawn mower.
For more information, read the Operator's manual for
the reference station and the Operator's manual for
the robotic lawn mower.
en
2021-12-28 16:19:07 2021-12-28 16:19:07