Table of Contents
Advertisement
E148859
To:
E148858
1.
Press the reset button with a long press
(for at least two seconds) until the
display of the speed alarm symbol and
the speed unit begins to blink. This
indicates that the screen is now in edit
mode.
2. Release the button.
3. Press the button with short presses
(less than two seconds) several times
until the desired speed displays. The
first screen after the first short press
will be the OFF option. Continue with
short presses to see the next speed
alarm option.
4. To save this speed, wait five seconds
on this screen or press the button
during for at least two seconds. You
will hear a beep and the display will
stop blinking indicating that your
selection has been saved.
Average Speed
Indicates the average speed
calculated since the function
was last reset.
E146277
EcoSport (CBY) Haiduong (Vietnam)/Rayong (Thailand), DN15-19A321-GC enPHI
Information Displays
60
Distance to Empty
Indicates the approximate
distance the vehicle will travel
E146276
on the fuel remaining in the tank.
Change in driving pattern may cause the
value to vary.
Outside Ambient Temperature
Indication
E148857
This will display the outside ambient
temperature in degrees Celsius.
INFORMATION MESSAGES
Note: Depending on the vehicle options
equipped with your vehicle, not all of the
messages will display or be available.
Certain messages may be abbreviated or
shortened depending upon which cluster
type you have.
E103626
Advertisement
Table of Contents
