Electrical Specifications - IMS MicroLYNX Quick Manual

Hide thumbs Also See for MicroLYNX:

Table of Contents

E l e c t r i c a l S p e c i f i c a t i o n s

P o w e r S u p p l y R e q u i r e m e n t s

See Section 2: Connecting Power, for recommended supplies.

V o l t a g e

MicroLYNX - 4 (MX-CS100-400) ............................. +12 to +48VDC

MicroLYNX - 7 (MX-CS100-700) ............................. +24 to +75VDC

C u r r e n t

Actual requirements depend on application and programmable current setting.

MicroLYNX - 4 (MX-CS100-400) ............................. 2A Typ., 4A Peak

MicroLYNX - 7 (MX-CS100-700) ............................. 3A Typ., 6A Peak

M o t o r D r i v e

See Section 3: Connecting a Motor, for recommended motors; Section 6: Control-

ling the Motor Current and Section 7: Setting the Motor Resolution for details on

the following specifications.

Motor Type ........................................................................ 2/4 Phase bipolar stepper

Motor Current (Software Programmable)

Microstep Resolution (# of settings) ......................... 14

Steps per Revolution (1.8° Motor)

I s o l a t e d D i g i t a l I / O

See Section 8: Using the Isolated Digital I/O, for usage instructions.

Number of I/O ............................................................... 6 std, expandable to 24

Input Voltage ................................................................... +5 to +24VDC

Output Current Sink .................................................... 350mA per Line

Input Filter Range (Programmable) .......................... 215Hz to 21.5kHz

Pull-up Resistors ............................................................. 7.5 kΩ switchable

Pull-up Voltage (max)

Protection ............................. Over temp, short circuit, inductive clamp

Isolated Ground .................. Common to the 6 I/O lines

Arrow.com.

Downloaded from

MicroLYNX - 4 ............................................... to 4A Peak

MicroLYNX - 7 ............................................... to 7A Peak

400, 800, 1000, 1600, 2000, 3200, 5000, 6400, 10000, 12800,

25000, 25600, 50000, 51200.

Internal (Not an Output) .............................. +5VDC

External .............................................................. +24VDC

Table of Contents