Connecting To The Relay For Setting Via Reydisp Evolution; Connecting To The Relay For Setting Via Reydisp Manager - Siemens 7SR17 Rho Manual

Chapter 2) 7SR17Rho Settings & Instruments
2.1.4

Connecting to the Relay for setting via Reydisp Evolution

When Reydisp software is running all available communication ports will automatically be detected.
On the start page tool bar open up the sub-menu 'File' and select 'Connect'.
The 'Connection Manager' window will display all available communication ports. With the preferred port
highlighted select the 'Properties' option and ensure the baud rate and parity match that selected in the relay
settings. Select 'Connect' to initiate the relay-PC connection.
The relay settings can now be configured using the Reydisp software. Please refer to the Reydisp Evolution
Manual for further guidance.
2.1.5

Connecting to the Relay for setting via Reydisp Manager

Reydisp Manager provides the functionality of Reydisp Evolution and also provides access to user logic within the
relay via an easy to use graphical interface.
For full details refer to the 'Reydisp Manager Use Guide'.
Chapter 2) Page 20 of 22
Figure 2.1-3 PC Comm Port Selection
©2014 Siemens Protection Devices Limited