BMW GRAN COUPE 4 Series Owner's Manual page 57

▷ Driving Dynamics Control.
▷ Driver's seat position, exterior mirror posi‐
tion, steering wheel position.
▷ Intelligent Safety.
▷ Active Blind Spot Detection.
Profile management
Selecting a driver profile
Regardless of the remote control in use, a dif‐
ferent driver profile may be activated. This al‐
lows you to call up personal vehicle settings,
even if you did not unlock the vehicle with your
own remote control.
Using iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. Select driver profile.
4. "OK"
▷ All settings stored in the called-up driver
profile are automatically applied.
▷ The called-up driver profile is assigned to
the remote control being used at the time.
▷ If the driver profile is already assigned to a
different remote control, this driver profile
will apply to both remote controls.
Using a guest profile
The guest profile is for individual settings that
are stored in none of the three personal driver
profiles.
Using iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. "Drive off (guest)"
4. "OK"
The guest profile cannot be renamed. It is not
assigned to the current remote control.
Online Edition for Part no. 01402978272 - II/17
Opening and closing
Renaming a driver profile
A personal name can be assigned to the active
driver profile to avoid confusion between the
driver profiles.
Using iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. Select driver profile.
The driver profile marked with this sym‐
bol can be renamed.
4. "Change driver profile name"
5. Enter profile name.
6. Select the symbol.
Resetting a driver profile
The settings of the driver profile currently in
use are reset to their factory settings.
Using iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. Select driver profile.
The driver profile marked with this sym‐
bol can be reset.
4. "Reset driver profile"
5. "OK"
Exporting driver profiles
Most settings of the active driver profile can be
exported.
Exporting can be helpful for storing and re‐
trieving personal settings, for instance before
delivering the vehicle to a workshop. The
stored driver profiles can be taken into another
vehicle.
Using iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. Select driver profile.
Controls
57