BMW GRAN COUPE 4 Series Owner's Manual page 148

Controls
The setting is stored for the driver profile cur‐
rently used.
COMFORT
Concept
For a balanced tuning with maximum driving
stabilization.
Activating COMFORT
Press button repeatedly until COM‐
FORT is displayed in the instrument
cluster.
In certain situations, the system automatically
changes to the NORMAL program, automatic
program change, refer to page 147.
ECO PRO
Concept
ECO PRO provides consistent tuning to mini‐
mize fuel consumption for maximum range
with maximum driving stabilization.
Comfort functions and the engine Controller
are adjusted.
The program can be configured to individual
specifications.
Activating ECO PRO
Press button repeatedly until ECO
PRO is displayed in the instrument
cluster.
Configuring ECO PRO
Using iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. If necessary, "Driving mode"
4. "Configure ECO PRO"
5. Select the desired setting.
148
Driving stability control systems
Online Edition for Part no. 01402978272 - II/17
The setting is stored for the driver profile cur‐
rently used.
Configuring driving program
Settings can be made for the following driving
programs in Driving mode:
▷ SPORT, refer to page 147.
▷ ECO PRO, refer to page 207.
Displays
Program selection
Pressing the button displays a
list of the selectable programs.
Depending on your vehicle's op‐
tional features, the list in the in‐
strument cluster can differ from
the illustration shown.
Selected program
The instrument cluster displays
the selected program.
Drive-off assistant
Concept
This system supports driving off on inclines.
The parking brake is not required.
Driving off with the drive-off assistant
1. Hold the vehicle in place with the foot
brake.
2. Release the foot brake and drive off with‐
out delay.
After the foot brake is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle load, the vehicle may
roll back slightly.