BMW GRAN COUPE 4 Series Owner's Manual page 249

Removing the cover
1. Use the onboard vehicle tool kit to loosen
the three cover screws, arrow 1.
2. Pull up the holder, arrow 2.
3. Remove the cover from one side, arrow 3.
4. Press the four fasteners and remove the
cover.
Attaching the covers
1. When attaching the cover, make sure that
all four fasteners are engaged.
2. Attach the cover under the rubber lip and
then thread it between the bars.
3. Press down on the holder and tighten the
three screws.
Online Edition for Part no. 01402978272 - II/17
Replacing components
In the cargo area
1. Fold the cargo floor panel up, arrow.
2. Reach under the cargo floor panel and fold
the cargo floor panel up, arrow.
Information on the fuse types and locations is
found on a separate sheet.
Attaching the cargo floor panel
1. Proceed in the reverse order to attach the
cargo floor panel.
Mobility
249