BMW GRAN COUPE 4 Series Owner's Manual page 171

Hide thumbs Also See for GRAN COUPE 4 Series:
Table of Contents

Advertisement

vehicle symbol. When the parking assistant
is active, suitable parking spaces are high‐
lighted.
If a diagonal or parallel parking space is
clearly detected, the system automatically
adjusts the suitable parking method. In the
case of parking spaces suitable for parallel
and diagonal parking, a selection menu is
displayed. In this case, the desired parking
method must be selected manually.
The parking procedure is ac‐
tive. Steering control has
been taken over by system.
Parking space search is always active
whenever the vehicle is moving forward
slow and straight, even if the system is de‐
activated. When the system is deactivated,
the displays on the Control Display are
shown in gray.
Parking using the parking assistant
Parking
1.
Press park assistance button or shift
into reverse gear to switch the parking as‐
sistant on, refer to page 170. Activate the
parking assistant, if needed.
Parking assistant is activated.
2.
Pass the row of parked vehicles at a speed
of up to approx. 22 mph/35 km/h and at a
distance of maximum 5 ft/1.5 m.
The status of the parking space search and
possible parking spaces are displayed on
the Control Display, refer to page 170.
3.
Follow the instructions on the Control Dis‐
play.
The best possible parking position will
come after gear change on the stationary
vehicle - wait for the automatic steering
wheel move.
Online Edition for Part no. 01402978272 - II/17
Driving comfort
The end of the parking procedure is indi‐
cated on the Control Display.
4.
Adjust the parking position yourself, if
needed.
Interrupting manually
The parking assistant can be interrupted at any
time:
Press park assistance button.
"Parking Assistant" Select the symbol
on the Control Display.
Interrupting automatically
The system is interrupted automatically in the
following situations:
If the driver grasps the steering wheel or
takes over steering.
If a gear is selected that does not match
the instruction on the Control Display.
If the vehicle speed exceeds approx.
6 mph/10 km/h.
Possibly on snow-covered or slippery road
surfaces.
When there are obstacles that are hard to
overcome, such as curbs.
When there are obstacles that suddenly
appear.
If the PDC Park Distance Control displays
clearances that are too small.
If a maximum number of parking attempts
or the time taken for parking is exceeded.
If DSC is being deactivated.
When switching to another function on the
Control Display.
A Check Control message is displayed.
Resuming
An interrupted parking procedure can be con‐
tinued, if needed.
Controls
171

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents