Technical Assistance - Pentax IPFC 109 Operating Manual

10. Technical Assistance

For more technical information contact the authorized reseller providing the following information. The solution to the
problem will be found faster and easier if full information is provided.
Model/Serial Code
Line Voltage: ___ [V]
description of problem:
installation type:
motor type:
if submersible: cable lenght [m]: _____
P2 motor [kW]:____
if single phase: capacitor
_____ [UF]
tank volume: _____ [liters]
number of DOL pumps: ___
medium ambient temperature:
_____ [°C]
digital inputs used:
electric and hydraulic scheme of the system (more detailed as possible)
set parameters: please fill the instal. param. and adv. param columns in the software scheme.
38
LCD version (shown when IPFC is power
supplied)
LCD = _.__
Line Frequency:
wall mounted
single phase
submersible
rated motor Volt [V]:___
if singlephase: starting Amp
I st = _____ [A]
pressure sensor
INV version (shown when IPFC is power
supplied)
INV = _.__
50 Hz
if submersible: cable section [mm
rated motor Amp [A]:__
pump performances
Q = ____ [l/min]
H = ____ [m]
precharge pressure: _____ [bar]
number of COMBO pumps: ___
4 mA = ___ [bar]
20 mA = ___[bar]
digital ouputs used:
60 Hz
on motor fan cover
three phase
surface
2
]:____
rated motor Hz:___